다울빛 이주여성 연합회

logo

한국어

정보마당

Bella2021.03.26 17:14
Click here to buy FAG 21310E.TVPB bearing.
Do not directly hammer the end surface and non-stressed surface of SKF bearing during installation. Press blocks, sleeves or other installation tools should be used to make SKF bearings evenly stressed. Do not install through the transmission force of rolling elements. If the installation surface is coated with lubricating oil, the installation will be smoother. If the matching interference is large, the SKF bearing should be installed as soon as possible after being heated to 80~90℃ in mineral oil. The oil temperature should be strictly controlled not to exceed 100℃ to prevent the tempering effect from reducing the hardness and affecting the size recovery. When the disassembly is difficult, it is recommended that you use the disassembly tool to pull outwards and carefully pour hot oil on the inner ring. The heat will expand the inner ring of the SKF bearing and make it easier to fall off.
문서 첨부 제한 : 0Byte/ 5.00MB
파일 크기 제한 : 5.00MB (허용 확장자 : *.*)