다울빛 이주여성 연합회

logo

한국어

정보마당

2018.12.24 13:58

캘리그라피 수업

조회 수 1953 추천 수 0 댓글 1
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
캘리그라피 수업.jpg


       2018. 12. 14. 마감

     

?
  • ?
    Bella 2021.06.03 17:25

    Click here for more detils about 2315K+H2315 FAG


    If the bearing is damaged due to disassembly inspection,the problem and cause of the damage can be judged according to the damage of the bearing. The imported bearing raceway and roller body are tempered. Burns are usually caused by insufficient lubrication, unqualified or deteriorated lubricants, and excessive bearing equipment. The crack of the bearing seat ring may be caused by the tight fit of the TIMKEN bearing, the loosening of the inner and outer rings, the deformation of the bearing seat, and the uneven processing of the bearing surface of the equipment.

    Cage breakage is caused by lack of lubrication,roller breakage,seat ring skew,etc. Severe wear of the seat race may be caused by foreign objects falling into the seat ring, insufficient lubricant, or an improper lubricant trademark. The uneven contact surface between the plastic deformed bearing raceway and the roller indicates that the imported bearing has undergone plastic deformation. The reason is that under a large static load or impact load, part of the stress on the working surface exceeds the yield limit of the material, which usually occurs on TIMKEN bearings with lower speeds.

    Judgment during cleaning inspection of TIMKEN bearings

    TIMKEN bearing seat and sealing plan and slippery rules are the crux of the application of the roller press. Here, we help you judge bearing equipment, slippery and maintenance methods, and methods necessary to control unplanned downtime and keep the roller press more productive.

    Exposure to heavy loads, striking loads, oscillations, and other premises will lead to a series of shafting errors in mining and cement equipment. The self-aligning bearing system supplies a variety of proven solutions to a series of mine and factory equipment.

    In the traditional solid-end and floating-end bearing equipment, TIMKEN bearings are commonly used in these two parts. Although this type of equipment can compensate for shaft errors, it does not allow sufficient axial movement. In order to allow sufficient axial movement, non-locating bearings must be able to move with the shaft without igniting beneficial external axial loads. Toroidal roller bearings supply this axial movement.

    A toroidal roller bearing that brings together the strengths of TIMKEN bearings, cylindrical and needle bearings. The rollers in the toroidal roller bearings are not affected by the movement of the shaft and can always find a good position to carry the load.

    When inspecting the disassembled imported bearings, first record the bearing surface, confirm the lubricant residue, and clean the imported bearings after sampling. Detergents are widely used in gasoline and kerosene.

    Imported cleaning is divided into rough washing and rough washing. The metal mesh is first placed in the container to prevent TIMKEN bearings from indirectly treating the dirt in the container. If the bearing is deformed by dirt during the rough cleaning process, it will damage the rotating surface of the intake bearing and should be paid attention to. In crude oil, brush grease and adhesives. After cleaning, the cleaning effect is good.

    Fine cleaning is to rotate the imported bearing in the cleaning oil and carefully clean it. In addition, the washing oil should be changed frequently to keep it clean.

    In order to determine whether the disassembled can last longer, consider the raceway surface, rotating surface and common surface conditions, rod frame wear environment, TIMKEN bearing clearance increase and reduce damage to the bearing. Dimensional accuracy after washing. Inseparable small ball bearings, etc., then check the outer ring with the inner ring with one hand.


  1. 다울빛 이주여성연합회 성과보고회겸 (송년회)

  2. ♣ 제 1회 부평구 다문화 축제 다울(다함께 사는 우리)축제 ♣

  3. 2017년 인생교실 프로그램 (한국인과 다문화가정 모두)

  4. 2017년 다울빛 이주여성 연합회 활동계획표 (6-11월)

  5. 2017년 프로그램 안내

  6. 캘리그라피 수업

  7. 쿠킹클라스 엄마의 맛

  8. 퍼스트피플 [강화도 고려문화축전]

  9. 다울빛 이주여성연합회 &부평구 다문화센터 집담회

  10. 인테리어필름래핑사 양성과정 완료

  11. 다울빛 & JK위드미성형외과 MOU 체결

  12. 다울빛 이주여성연합회 KBS1 노래가 좋아 방송 출연(7월 14일 오전 10시 30분)

  13. 다울빛 이주여성연합회 인테리어필름(시트지)래핑 양성과정 제10회(마지막)

  14. 다울빛 이주여성연합회 캘리크라피 수업

  15. 인테리어필름(시트지) 래핑양성과정 9회

  16. 다울빛 이주여성연합회 인테리어(시트지 필름) 양성 사업 8회

  17. 6월 16일 토요일 오후 3-6시 숭의 평화시장 : 바자회(프리마켓) 개최

  18. 다울빛 이주여성 연합회! 중앙선거위원회 CF (6/13 지방선거)

  19. 5월 7일 의왕시 공연 (퍼스트 피플 국제 전통예술공연단)

  20. 다울빛 이주여성연합회 매주 일요일 1시 한국어 수업!

  21. 2018년 04월 11일 인천광역시 비영리 민간단체 등록 완료!

  22. 인테리어필름(시트지) 래핑 양성과정 2회

  23. 다울빛 이주여성연합회 첫 공모사업 시작(인테리어필름 래핑양성과정)

  24. 2018 여성 친화도시 조성사업 <인테리어 필름 양성과정: 일자리 창출> 선착순 모집 중

  25. 2018 다울빛 이주여성연합회 캘리크라피 첫 수업 (3월 7일)

Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 ... 18 Next
/ 18